Home » Auckland heat pumps
Heat pumps
Heat Pump Installation &
Servicing in Auckland
From a single room to a whole-home ducted system, we design, supply, install and service heat pumps across Auckland.
Not sure which system you need?
Tell us a bit about your home, and we’ll recommend the right fit.
Your enquiry goes straight to the Sona Air team. Your details are handled under our Privacy Policy.
Ratings
Reviews
Conscious
Sona Air supplies, installs and services heat pumps for homes across Auckland. Our team is based in Albany and installs Mitsubishi Electric, Panasonic and Rinnai systems. Whether you need one high-wall unit for the lounge or a ducted system for the whole house, we’ll visit, size it properly and give you a fixed, itemised quote before any work starts.
The basics
What Is a Heat Pump?
A heat pump heats and cools your home by transferring heat rather than generating it directly. In winter, it moves warmth from outside air into your home; in summer, it reverses the process to cool your rooms. Options range from a single high-wall unit to multi-system and whole-home ducted installations. Hot water heat pumps use the same principle to heat water. The right system depends on your home’s layout, insulation and the rooms you want covered.
Heat pumps
Which Heat Pump is Right for You?
Start with the rooms or water heating you need covered. We’ll confirm the right size and installation approach after assessing the property.
High-Wall Heat Pumps
A single indoor unit heating and cooling one room. Fast and affordable, often installed in a matter of hours.
Multi-System Heat Pumps
One outdoor unit connected to two to four indoor units, each independently controlled. Covers multiple rooms without full ducting.
Ducted Heat Pumps
Whole-home heating and cooling from one outdoor unit and a fully concealed duct network, with a single controller for every zone.
Hot Water Heat Pumps
Energy-efficient hot water heating that draws heat from the air rather than direct electric or gas heating, lowering running costs over time.
Plan your installation
How much does heat pump installation cost in Auckland?
Plan your budget with indicative installed prices, including GST. We’ll confirm the equipment, work and total cost in a fixed, itemised quote.
High-wall
One main room
$2,817.50–$6,670
Multi-system
A few rooms, depending on configuration
Around $6,039.80
Ducted
Whole home or multiple zones
Site inspection required; GST-inclusive quote after assessment
Hot water
Household water heating
GST-inclusive quote on request
Indicative prices vary by model and installation scope. Your written quote confirms the total, including GST.
What affects the price?
Pipe run length, back-to-back versus split installation, mounting height and access, electrical work, and removing an old unit all affect the scope. Capacity, indoor units and ductwork also change the final price.
Not sure what size you need? Read our room-by-room heat pump sizing guide.
Still deciding?
Find Your Fit in Under a Minute
Answer three quick questions for a starting suggestion. We’ll confirm suitability after assessing your property.
Start with a high-wall heat pump
A wall-mounted unit is often a practical fit for one room.
Prefer to talk? Call 09 945 3808.
Our range
Brands we install
We select the model and capacity around the property, then explain the relevant features and warranty in your quote.
Mitsubishi Electric
Mitsubishi Electric offers high-wall and ducted systems for different room sizes and layouts. We can compare the models’ controls, sound levels and published efficiency ratings when choosing a system for your home.
Panasonic
Panasonic’s high-wall range offers options for bedrooms, living areas and larger spaces. Features differ by model, so we’ll match capacity and controls to the rooms you want to heat and cool.
Rinnai
Rinnai has high-wall, ducted and hot water heat pump options in Sona Air’s range. We’ll assess whether a room system, a whole-home design or a water-heating upgrade suits your project.
Support after installation
Heat pump servicing, repairs & upgrades
Sona Air also looks after existing systems, including equipment we did not originally install.
Servicing & tune-ups
Regular service can include filter cleaning, drainage checks, coil inspection, refrigerant and electrical checks where appropriate, and a performance test. We’ll explain the scope for your model.
Repairs & breakdowns
If a unit is not heating, leaks, makes unusual noises or has a controller fault, tell us the model and symptoms. We’ll discuss diagnosis and appointment availability; urgent jobs can be prioritised where possible.
Upgrading an old heat pump
We assess your current equipment and whether its capacity or placement still suits the room. Then we can recommend a replacement with appropriate heating and cooling performance.
Coil & deep cleaning
Build-up on filters and coils can restrict airflow. We inspect and clean the relevant components and check whether a deeper service is needed.
Servicing & tune-ups
Regular service can include filter cleaning, drainage checks, coil inspection, refrigerant and electrical checks where appropriate, and a performance test. We’ll explain the scope for your model.
Repairs & breakdowns
If a unit is not heating, leaks, makes unusual noises or has a controller fault, tell us the model and symptoms. We’ll discuss diagnosis and appointment availability; urgent jobs can be prioritised where possible.
Upgrading an old heat pump
We assess your current equipment and whether its capacity or placement still suits the room. Then we can recommend a replacement with appropriate heating and cooling performance.
Coil & deep cleaning
Build-up on filters and coils can restrict airflow. We inspect and clean the relevant components and check whether a deeper service is needed.
Ways to plan your project
Heat Pump Finance & Rental Properties
Spreading the cost
The ANZ Good Energy Home Loan is a top-up option for eligible existing ANZ home loan customers and can cover heat pumps. Other banks may offer similar products; check their current terms directly.
Sona Air can provide a written quote for your application. Lending approval is the bank’s decision.
Heat pumps for landlords
The Healthy Homes heating standard requires qualifying fixed heating capable of maintaining at least 18°C in the main living room. We can assess the room and quote an appropriately sized heat pump for a rental property.
Why Sona Air
Why Choose Sona Air
1,000+ Installations
Heat pump installations across residential and commercial properties, with one team for supply, installation and care.
IQP Registered
An Independently Qualified Person (IQP) registered team, with attention to compliance and safety.
Fixed, Itemised Quotes
Clear equipment recommendations, installation scope and GST-inclusive pricing before work begins.
5.0 Google Rating
Customer feedback on professional service, communication and the quality of the finished installation.
Ready to talk about your home? Get a free, no-obligation site assessment.
How we work
Our Installation Process
Site assessment & recommendation
We review the layout, insulation, access and rooms to be heated or cooled before recommending a system.
Fixed, itemised quote
You receive a written quote explaining the equipment, included work, GST and expected timing before deciding.
Installation, commissioning & care
We install and test the system, explain its controls and discuss a suitable servicing routine.
Installation timing depends on the system and scope. We confirm the schedule in your written quote.
Heat Pump Installers Across Auckland
From our Albany base we install and service heat pumps across Central Auckland, the North Shore, West Auckland, East Auckland, South Auckland, Manukau, Waitākere and Rodney.
Looking for a local service page? Explore heat pump installation and servicing in Warkworth, Wellsford and Whangārei. For whole-home systems further south, see ducted heat pumps in Waikato.
Customer reviews
5.0 ★★★★★ Google Rating
Reviews of Sona Air’s installation and servicing work. These are company-wide reviews, not specific to one service area.
“Prakash explained everything to me and I was very impressed with his team as well.”
“Prakash visited our site and explained all the options. The install went well with an excellent level of finish.”
“Installation was exceptionally well done, neat, tidy and professional.”
Commercial HVAC
Need heating or cooling for a business?
We design and install commercial HVAC for offices, retail, hospitality and industrial buildings, including VRF multi-zone systems. See our commercial air conditioning services.
Which heat pump is right for my home?
It depends on how many rooms you want to condition and your home’s layout. A high-wall unit may suit one room, a multi-system several selected rooms, and ducted heating and cooling a whole home; our site assessment confirms the model and capacity.
How much does installation cost in Auckland?
High-wall installations are approximately $2,817.50–$6,670 including GST, depending on the system and work required. Ducted: Site inspection required; GST-inclusive quote after assessment. Your written quote confirms the total and inclusions.
Do you offer financing?
Eligible existing ANZ home loan customers may be able to finance a heat pump through the ANZ Good Energy Home Loan. We can provide a written quote for your application; the bank determines eligibility, terms and approval.
Do you cover Warkworth, Wellsford and Whangārei?
How long does installation take?
It depends on the system and property access. A straightforward high-wall installation can often be completed within a day, while multi-system and ducted projects take longer; we confirm the schedule in the quote.
How often should a heat pump be serviced, and what does it cost?
Many systems benefit from an annual professional service, alongside owner filter cleaning as directed by the manufacturer. The cost depends on the model, access and whether deep cleaning or repairs are needed, so ask for a current service quote.
What warranty do I get?
Warranty cover depends on the model and the work supplied. We’ll identify the manufacturer’s equipment warranty and any installation workmanship cover in your written quote; your statutory consumer rights also apply.
Do I need consent to install a heat pump in Auckland?
Consent and approval requirements depend on the property and the proposed work. We’ll check the installation with you, including outdoor-unit position and noise, any building work, and body corporate or landlord permission for an apartment or unit before proceeding.
Let’s make your home comfortable
Get a free quote for your Auckland home
Tell us about your Auckland home and what you need. We’ll help you choose the right system, or arrange care for the one you have.
- ✓ Local Albany team
- ✓ Fixed, itemised quotes
- ✓ Installation & ongoing care
Tell us what you need
Start with a few details about your project.
"*" indicates required fields
Your enquiry goes straight to the Sona Air team. Your details are handled under our Privacy Policy.